Trudesign Skin Fittings 1 1/2" BSP 90680

 Trudesign Skin Fittings 1 1/2" BSP 90680

For use below the water line TruDesign Skin Fittings are certified by the International Marine Certification Institute (IMCI) & Bureau Veritas to meet; ISO 9093-2 Small craft -- Seacocks and through-hull fittings -- Part 2: Non-metallic.
They also comply with ABYC H-27 when used in conjunction with the TruDesign ABYC collar

Designed and made in New Zealand, the Recessed Skin Fitting body and nut are moulded from glass-reinforced nylon composite. High strength, high-modulus glass fibres provide dramatic strength, stiffness, toughness and dimensional stability. These properties allow a significant weight reduction over metallic fittings.
TruDesign Skin Fittings eliminate the corrosion and electrical bonding problems associated with metallic fittings.

When used in below waterline applications, a Ball Valve should be directly connected for safety and compliance to relevant marine standards.

• Manufactured from a glass-reinforced nylon composite - High strength and light weight
• Compatible with most hull types - Can be used on wood or GRP hulls
• Immune to corrosion and electrolysis - Long life with no concerns over decreased performance due to corrosion
• Chemical resistant - Impervious to diesel, petrol and antifouling paints
• UV resistant - Will not degrade or discolour with ultraviolet light from the sun
• High quality surface finish - Will not discolour with green film as similar bronze fittings do
• Paintable - Can be painted with all types of antifouling
• Limited Warranty
• TruDesign accepts no responsibility for Ball Valves or Skin Fittings which are improperly installed, especially in the case where a Ball Valve with tapered threads has been used.

Specification:

• SKU: 90680
• Skin Fitting Recessed 1 ½" BSP